Particularly neat welded edges are obtained during hot blade cutting by compressing the cut edges.

Applications:

• Hot blade cutting and cutting to length
• Elastic and non-elastic textile materials
• PA, PES, PP, dyneema^®, non-woven, foils and other materials as well as mixed fabric

Characteristics and advantages:

• Neatly welded cut edges
• Very short cycle times
• Freely programmable and storable program sequences
• Servo drives with very tight tolerances
• Intake drive with function monitoring and belt detection device
• Precise lateral belt guidance before and after the blade
• Hot blade with electronic temperature control on one side
• Hot blade protection in order to prevent contact with the belt during conveying or in the event of a belt jam
• Blade width of up to 160 mm
• Belt widths from 10 mm to 120 mm, according to machine
• Belt thickness of 0.5 mm to 4 mm, according to machine
• Feed rate of up to 120 m/min, according to machine
• A very small distance between the blade position and the flat pressing position
• Flat pressing of the cut edges at both ends of a belt, starting from a length of 150 mm
• Additional length control in the cut-to-length mode
• Integrated piece counters
• Integrated scrap removal
• Cutting out and sorting of marked defective belt sections
• Connection for extractor
• Easy operation via touch panel

Options:

• Feed drive with dancing roller control for belt feed with reduced, even belt tension.
• Belt untangling unit and knot detection
• Hot blade rotatable pneumatically on one side by up to 45°
• Marking device for line marks
• Ring sensor for metal detection
• Winding devices with stacking system for the full coils
• Clamping device for fixing the end of the belt
• Winding rate of up to 180 m/min,
• Winding diameter of up to 500 mm
• Winding mandrel diameter of 30 mm (optional, slotted 40 mm version)